Sunday, October 25, 2009

Assembling the right elevator for riveting

Finished riveting the skeleton tonight and put it all together ready to rivet on the skin.

Saturday, October 24, 2009

Riveting the right elevator skeleton

Began to rivet the right elevator skeleton tonight.

Primed the right elevator

Over the last 2 nights, primed the skeleton for the right elevator.

Over the last 2 nights, primed the skeleton for the right elevator.

Wednesday, October 21, 2009

Etched and Alodined the Right Elevator skeleton

After a few days hiatus to sort out some work issues, back into the garage.
Etched and Alodined the skeleton of the right elevator.

Friday, October 9, 2009

Drilling, deburring and dimpling the Right Elevator

Good progress tonight, drilled all the holes to final size, deburred all edges anddimpled everything.
I also did the #12 ( big ) dimples and countersinking for the lead counterweight.

Thursday, October 8, 2009

Right elevator understructure

Assembled the right elevator understructure tonight, including drilling the holes through the lead counterweight, that is heavy stuff for a drill.
It went together quite quickly really, it looks more complete than it is, it will have to come apart again for plenty of work before any riveting takes place.


Wednesday, October 7, 2009

Elevator stiffeners all riveted



Both left and right, and the plate for the trim as well.

Tuesday, October 6, 2009

Back riveting the right elevator

I was making good progress too, until I riveted the wrong stiffener,
and only discovered it when I got to the last rivet.

I drilled out the full line of rivets, it wasn't too difficult in the
end, but enough for tonight.

Monday, October 5, 2009

Back riveting the elevator stiffeners

Just one rivet tonight, I came back quite late from our EAA Chapter
(315) meeting this evening. I got a look at Claudio Tottino's excellent RV-8 for a few minutes and his in-progress RV-12, I will definitely be going back to get some more guidance from him.

Sunday, October 4, 2009

Primed the elevator stiffeners

In 2 steps today, ready for back-riveting to the skin next.

Saturday, October 3, 2009

Etched and alodined

The elevator stiffeners this afternoon.

Thursday, October 1, 2009

Finished dimpling the elevator

Tonight, listening to Thomas Cahill's Mysteries of the middle ages

Tuesday, September 29, 2009

Left elevator dimpled

Pictured the cut out for mounting the trim cabling / actuator.

Monday, September 28, 2009

Dimpling the left elevator skin

Dimpled half the left elevator skin tonight, it's fairly tedious.

Sunday, September 27, 2009

Elevator drilling

Drilled the #40 holes in both elevators & stiffeners.

Saturday, September 26, 2009

Rudder Complete


Attached the clevis pins and locknuts to the rudder tonight - the rudder is now done.
Also finished trimming the last few remaining elevator stiffeners.

Thursday, September 24, 2009

All rudder rivets complete

Tonight, I final sized the holes in the bent rudder leading edge, deburred and fitted the AD-41-ABS blind rivets.
These are the last rivets in the rudder, all that remains are the hinges.

Wednesday, September 23, 2009

Rudder leading edge bending


The bend for the rudder leading edge, and cleco'd together...

Tuesday, September 22, 2009

Rudder skin riveting complete and bending the rudder leading edge

Busy night tonight, I figured out a way to rivet the skins rivets in the tight spaces on the aft edge of the skin, using a back-rivet plate, and a wood chisel to transfer the action of the rivet gun ( last picture ), so i am pleased with finishing all of the rivets in the rudder skin tonight.
Also began bending the leading edge of the rudder using the taped steel pipe method as outlined in the manual, I will probably enlist some help to get this completed tomorrow night.


Monday, September 21, 2009

More rudder skin riveting

Using the hand squeezer tonight to avoid noise. Trying to figure out some creative ways to rivet the skin near the trailing edge which is particularly tight.